Applied Lubrication Technology Inc. Chain Lube E-FGL is a paint compatible, e-coat approved lubricant which also meets the requirements of FDA 21 CFR 178.3570 (lubricants for incidental food contact). It is a polyalkylene glycol (PAG) based lubricant, that provides a high viscosity index, clean burning properties, low friction co-efficient, water solubility, thermo-oxidative stability, high EP failure loads, and provides superior low temperature properties. The excellent lubricity will provide outstanding overall load carrying capacity, film strength and anti-wear properties. Operating temperature range -40°C to 200 °C (-31°F to 392°F).
Some of the important physical properties of this product are provided in the table below.
|Chain Lube E-FGL||Typical Properties|
|Viscosity @ 40°C (104°F)||150 cSt|
|Viscosity @ 1000°C (212°F)||25 cSt|
|VI (Viscosity Index)||232|
|Flash Point (COC)||284°C (543°F)|
|Four Ball, CoF||0.32mm|
|Falex Pass Load Stage||1000 lbs|
Chain Lube E-FGL has been specially formulated for use in programmable, automatic, application systems for conveyor chains and gear applications in Automotive E-Coat Applications and Food Processing Equipment.
Chain Lube E-FGL is available in 18.9 Liter (5 Gallon) pails, 200 Liter (53 Gallon) drums.
All reasonable care has been taken to ensure the information contained in this document is accurate as of the day of printing. However, such information may be affected by changes in the blend formulation occurring subsequent to the day of printing. Material Safety Data Sheets are available for all Applied Lubrication Technology Inc. products and must be consulted for appropriate storage, safe handling and disposal information of the product. Please contact an Applied Lubrication Technology Inc. Representative to ensure accuracy. October 2012.