The SA-12ECS EconoLube System was specifically designed to meet the small-scale needs of industry where a large ‘Centralized’ type system would be unsuitable. The EconoLube is an attractive alternative for small facilities or large facilities with single line operations. Compact and competitively priced, the EconoLube system is simple yet integrates the same SA-20CB lubricator control board utilized in our larger systems, allowing for total unit flexibility. The SA -20CB is programmed utilizing ALT’s SA-50D Hand Held Programmer, therefore eliminating the chance of un-authorized setting changes.
All ALT components are designed for maximum usability, security and minimum maintenance. The Small, self contained system features a sealed reservoir, helping to ensure the tanks contents will remain free of contamination.
12 US Gallon Steel Reservoir
1GPM Capacity, 1:1 ratio Air Diaphragm (contained within the pump housing which also incorporates the pressure regulator and gauge)
Reservoir mounted Power Supply and Lubricator Controls
Top Mounted Float type Level gauge gives a quick and clear indication of reservoir lubricant level
Low Level System Shut Down to protect pump
150 Micron Line Filtration
4 Independently programmable I/O channels (see SA-20CB Product Data Sheet for more information
Optional 300GPH tank agitation pump puts back into suspension any solid lubricant particles that may settle out over time
|12 Gallon Econolube System||Typical Properties|
|Overall System Height||27.5”|
|System Weight (Empty)||85.0lbs|
|Electrical||115vac 60Hz (other available upon request)|
|Air Supply||Minimum ¼” line @ 80psi|
All reasonable care has been taken to ensure the information contained in this document is accurate as of the day of printing. We reserve the right to change any information. For current information, please contact Applied Lubrication Technology Inc. or an authorized representative of Applied Lubrication Technology Inc. June 2014.