Applied Lubrication Technology Inc. Chain Lube D-150A is a paint compatible, e-coat approved lubricant. It is polyalkylene glycol (PAG) based lubricant, that provides a high viscosity index, clean burning properties, low friction co-efficient, water solubility, thermo-oxidative stability, high EP failure loads, and provides superior low temperature properties. The excellent lubricity will provide outstanding overall load carrying capacity, film strength and anti-wear properties. Operating temperature range -40°C (-31°F) to 200 °C (392°F).
Some of the important physical properties of this product are provided in the table below.
|Chain Lube D-150A||Typical Properties|
|Viscosity||133 cSt @ 40°C (616.4 sus @ 104°F)|
|25.5 cSt @ 100°C (122.4 sus @ 212°F)|
|VI (Viscosity Index)||230|
|Flash Point (COC)||240°C (464°F)|
|Pour Point||-48°C (-54.4°F)|
|Specific Gravity||1.05 (g/ml)|
This product has been specifically developed for paint shop conveyor chains where e-coat paint compatibility is a necessity.
Chain Lube D-150A is available in 18.9 Liter (5 Gallon) pails, 200 Liter (53 Gallon) drums, and 1200 Liter (317 Gallon) returnable tote bin quantities.
All reasonable care has been taken to ensure the information contained in this document is accurate as of the day of printing. However, such information may be affected by changes in the blend formulation occurring subsequent to the day of printing. Material Safety Data Sheets are available for all Applied Lubrication Technology Inc. products and must be consulted for appropriate storage, safe handling and disposal information of the product. Please contact an Applied Lubrication Technology Inc. Representative to ensure accuracy. October 2012.